Salty's Forum
Welcome, Guest. Please login or register.

Login with username, password and session length


Welcome to the forum!
Checkout what others are building and share your own!

Author Topic: finishing resin lures  (Read 1111 times)

0 Members and 1 Guest are viewing this topic.

Offline Out Fishing

  • *
  • Posts: 2
finishing resin lures
« on: May 27, 2016, 10:16:27 pm »
Hello folks,

Im casting two part resin lures mixed with micro-spheres.  I'm getting a lot of fish eyes in my clear top coat.  The resin manufacturer says I need to wait 4 or 5 days for the resin to loose all the volatiles, others say at least two weeks.  I don't have that kind of patience.  Anyone have a clever trick to speed up the process?

Thanks for any help... 

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5578
    • Salty's Lures
Re: finishing resin lures
« Reply #1 on: May 28, 2016, 06:08:10 pm »
Fisheyes usually means oils have contaminated something. Are you using any release agent? Handling with uncovered hands? Your not going to speed much up if it has extended cure.
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts