Text only | Text with Images

Salty's Forum

General Category => Plug / Lure Building Forum => Topic started by: jctom on May 08, 2012, 05:35:38 PM

Title: More problems....
Post by: jctom on May 08, 2012, 05:35:38 PM
Hello again,

    When using E-Tex lite, I always seem to get spots on the lure where the epoxy won't take. Any suggestions? (And which epoxy would you suggest? E-Tex or DEVCON?)

Thanks again,

-Tom
Title: Re: More problems....
Post by: Salty on May 08, 2012, 07:36:42 PM
Contamination...finger oils I'm betting. Either epoxy will work well.
Title: Re: More problems....
Post by: Salty on May 08, 2012, 07:37:24 PM
Many use a scratch coat to stop this from happening...a real thin coat of krylon before you epoxy. Then rub with 600 grit paper, dust off and coat. Use gloves...very important.
Title: Re: More problems....
Post by: johnny ducketts on May 09, 2012, 01:13:50 PM
For what it's worth also, I those eye glass cleaning pads, similar to a alcohol wipe, before i epoxy, and I haven't had any problems with epoxy not sticking. I use Devcon 2 ton.
Title: Re: More problems....
Post by: Croaker on May 11, 2012, 11:06:56 AM
jd, are you using 30 min Devcon?
Title: Re: More problems....
Post by: johnny ducketts on May 14, 2012, 07:08:40 PM
I think so, it's the 2 ton
Text only | Text with Images