More problems....

[jctom]

Hello again,

    When using E-Tex lite, I always seem to get spots on the lure where the epoxy won't take. Any suggestions? (And which epoxy would you suggest? E-Tex or DEVCON?)

Thanks again,

-Tom

[Salty]

Contamination...finger oils I'm betting. Either epoxy will work well.

[Salty]

Many use a scratch coat to stop this from happening...a real thin coat of krylon before you epoxy. Then rub with 600 grit paper, dust off and coat. Use gloves...very important.

[johnny ducketts]

For what it's worth also, I those eye glass cleaning pads, similar to a alcohol wipe, before i epoxy, and I haven't had any problems with epoxy not sticking. I use Devcon 2 ton.

[Croaker]

jd, are you using 30 min Devcon?

[johnny ducketts]

I think so, it's the 2 ton