Author Topic: Before/Start of a new machine  (Read 158709 times)

0 Members and 104 Guests are viewing this topic.

Offline Out Fishing

  • Admin
  • *****
  • Posts: 1054
Re: Before/Start of a new machine
« Reply #90 on: May 11, 2011, 07:32:40 AM »
Finish axis tool holder. I think I last posted a pic of this with no guard over the pully.

Offline Out Fishing

  • ****
  • Posts: 2503
  • Build rods,plugs,flys and love to fish mostly surf
Re: Before/Start of a new machine
« Reply #91 on: May 11, 2011, 07:59:28 AM »
sweet!!!! :)
Born to fish forced to work
time spent fishing is time well spent

Offline Out Fishing

  • Admin
  • *****
  • Posts: 1054
Re: Before/Start of a new machine
« Reply #92 on: May 15, 2011, 12:23:50 PM »
IT'S ALIIIIIIIIIIIVE

Offline Out Fishing

  • Admin
  • *****
  • Posts: 1054
Re: Before/Start of a new machine
« Reply #93 on: May 15, 2011, 12:26:25 PM »
Front and Rear motors all powered and dithering. (means the encoder / servo drive is holding the motor in perfect stopped position)

No computer or switches hooked up yet but that's easy stuff now. The hardest part is making the rotary encoders talk to everything so the servo drives will work....SWEET

 :bhappy:

Offline Out Fishing

  • ****
  • Posts: 2503
  • Build rods,plugs,flys and love to fish mostly surf
Re: Before/Start of a new machine
« Reply #94 on: May 16, 2011, 09:20:06 AM »
your da man!! :)
Born to fish forced to work
time spent fishing is time well spent

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5648
Re: Before/Start of a new machine
« Reply #95 on: May 16, 2011, 03:20:46 PM »
Got the computer mounted today on the back of the box, got it wired and running to the board. I was able to command one axis right out of the gate. Other axis are dead but no worries I haven't set the ports and pins yet.

Got 4 switch lead input wires prepped to start hooking up. Still alot of wiring to do and troubleshoot. Probably another months worth of work at this rate.
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5648
Re: Before/Start of a new machine
« Reply #96 on: May 16, 2011, 03:25:47 PM »
4 switch leads is 5 wires each with a shield so 24 wires total of home, start, emergency, limit switch inputs to wire. The diagram is in my head. I have only looked at mfg spec sheets for pinouts so far and that's it. This is a nice breakout board too. I'll be able to command the variable speed spindle forward or backward and set the speed via computer in the program. That's not something I've ever been able to do even on the big backnife lathe. I'll be able to put a reverse trip lutz longdooey routine in there and have it spit the plug out into the bin :)
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • ****
  • Posts: 293
  • Fly fishing & tying, plugging, rod building...
Re: Before/Start of a new machine
« Reply #97 on: May 16, 2011, 08:56:01 PM »
Huh... you got a dipsy-doozy...  is it contagious

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5648
Re: Before/Start of a new machine
« Reply #98 on: May 17, 2011, 04:31:58 AM »
you might want to start that antibiotic prescription right away Bruce :)
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • *
  • Posts: 1850
  • Doesn't really fish
Re: Before/Start of a new machine
« Reply #99 on: May 17, 2011, 07:51:28 AM »
can this thing fix chairs by any chance?

Offline Out Fishing

  • Admin
  • *****
  • Posts: 1054
Re: Before/Start of a new machine
« Reply #100 on: May 17, 2011, 09:10:34 AM »
 :P

Offline Out Fishing

  • Admin
  • *****
  • Posts: 1054
Re: Before/Start of a new machine
« Reply #101 on: May 18, 2011, 02:01:17 PM »
Vega CNC

I've had this running for over 1 hour now and no loss of position so far. This is just a quick program I threw together to exercise the finish axis. This is running at ~300" per minute speed. It will run faster but would probably lose step/direction pulses. This is plenty quick enough. The roughing axis are still not ready, found a bad servo drive yesterday.

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5648
Re: Before/Start of a new machine
« Reply #102 on: May 18, 2011, 03:29:28 PM »
That machine ran like that non stop for 2 hours. No failures. That is friggin flying. Amazing what you can do if you put your mind to it :)
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5648
Re: Before/Start of a new machine
« Reply #103 on: May 18, 2011, 03:31:39 PM »
That was moving 9" of Z and 5" of X travel. These are rapid positions. Tomorrow I'll interface the spindle drive so it will go forward and reverse  :bhappy:
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • ****
  • Posts: 276
Re: Before/Start of a new machine
« Reply #104 on: May 18, 2011, 05:57:53 PM »
WOW very nice salty