Salty's Forum
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Checkout our new BUGGERENO kits!
Home
Search
Calendar
Login
Register
Salty's Forum
»
General Category
»
Plug / Lure Building Forum
»
More problems....
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: More problems.... (Read 3645 times)
0 Members and 1 Guest are viewing this topic.
Out Fishing
Posts: 4
More problems....
«
on:
May 08, 2012, 05:35:38 PM »
Hello again,
When using E-Tex lite, I always seem to get spots on the lure where the epoxy won't take. Any suggestions? (And which epoxy would you suggest? E-Tex or DEVCON?)
Thanks again,
-Tom
Logged
Out Fishing
Admin
Posts: 5648
Re: More problems....
«
Reply #1 on:
May 08, 2012, 07:36:42 PM »
Contamination...finger oils I'm betting. Either epoxy will work well.
Logged
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts
Out Fishing
Admin
Posts: 5648
Re: More problems....
«
Reply #2 on:
May 08, 2012, 07:37:24 PM »
Many use a scratch coat to stop this from happening...a real thin coat of krylon before you epoxy. Then rub with 600 grit paper, dust off and coat. Use gloves...very important.
Logged
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts
Out Fishing
Posts: 51
Re: More problems....
«
Reply #3 on:
May 09, 2012, 01:13:50 PM »
For what it's worth also, I those eye glass cleaning pads, similar to a alcohol wipe, before i epoxy, and I haven't had any problems with epoxy not sticking. I use Devcon 2 ton.
Logged
Out Fishing
Posts: 207
Re: More problems....
«
Reply #4 on:
May 11, 2012, 11:06:56 AM »
jd, are you using 30 min Devcon?
Logged
Tom C
Out Fishing
Posts: 51
Re: More problems....
«
Reply #5 on:
May 14, 2012, 07:08:40 PM »
I think so, it's the 2 ton
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Salty's Forum
»
General Category
»
Plug / Lure Building Forum
»
More problems....