Salty's Forum

General Category => Plug / Lure Building Forum => Topic started by: Hookset on January 21, 2015, 08:48:58 AM

Title: Sanding sealer - when to apply
Post by: Out Fishing on January 21, 2015, 08:48:58 AM

Salt, just read the posting on sealer, great post and an great amount of information. I have been building my plugs learning along the way for about 3 years, this type of information is incredibly valuable

It says it is good to also apply sanding sealer after sealing. Can you clarify for me if that should take place after the sealer dries?

Thanks

Title: Re: Sanding sealer - when to apply
Post by: Out Fishing on January 21, 2015, 09:12:39 AM

Yes every stage needs to be properly dry. If you don't you'll most likely end up with a gooey mess that will never dry.


The sanding sealer will give you a nice paint flow and seal over any areas that didn't fill on your previous dip.

Title: Re: Sanding sealer - when to apply
Post by: Out Fishing on January 21, 2015, 10:18:49 AM

Thanks for the feedback, makes sense!