Salty's Forum
General Category => Plug / Lure Building Forum => Topic started by: haddockfanatic on May 19, 2013, 06:14:51 AM
-
i want to start using an air brush no nothing about them looked on dixie art more confused now whats a decent set ub for a dub like me to start with who has never used anything more than a spray can or a brush
-
well haddock speaking for myself i like the iwata eclips hp.........easy the clean and rebuild if need be.......but ya might want to pm the guys who paint those helmets......they got some real experance
-
I use 2 different airbrushes, but both are dual action (1st action: press down for air. 2nd action: pull back for paint.), this is what you want and need. I spray at 70 psi to avoid clogging the tip of the airbrush. The choice for having a dual action airbrush will allow variations in controlling your paint's output. I can spray a line so thin it would look like a hair strand, but I can spray a wide width of about 2" - 3" for max coverage depending on how far away I am from the lure blank.
Here is one of my main "guns":
This is an Iwata HP-C ($193) - the absolute best for detail work. I use this for small jobs (lure blanks and other things). The beauty of this gun is the tiny 1 oz. reservoir cup on top of the gun (gravity fed, permanently fixed), is perfect for small jobs like lure painting, and model car detailing. It's also a top choice among custom painting Hot Wheels diecast miniatures. Since there is such a small area to paint, you would only need to use a small amount (½ cup) to paint the lure's body. This would be THE ideal gun to get. Made in Japan, unreal quality.
Go here to Coast Airbrush: http://www.coastairbrush.com/proddetail.asp?prod=H4001 (http://www.coastairbrush.com/proddetail.asp?prod=H4001)
And, I also use this one too, the Iwata HP-BCS Eclipse ($101), which is another nice gun, I use this for medium jobs (shirts, helmets, auto parts, etc.). Though this is nice gun, you would need a small bottle attached to the underside of the gun (vacuum fed). It would be another expense for one, and a pain in the butt to change out different colors. But, it is far more inexpensive than the first gun above. Also made in Japan.
Go here to Coast Airbrush: http://www.coastairbrush.com/proddetail.asp?prod=ECL2000 (http://www.coastairbrush.com/proddetail.asp?prod=ECL2000)
Not all my airbrushes are Iwatas, I also use this one for helmets, shirts, and other things. It's a Thayer & Chandler Vega 2000 w/ Fine tip, ($58, vacuum fed). This is one of my all-time favorites! Very inexpensive and a workhorse too. A thin body, like a pencil, but a nice smooth flow, like an Iwata - but without the high price tag. An American made gun and a great quality gun for the price - I have 2 of these, one is over 25 yrs old, and I've never broken it!
Go here to Coast Airbrush: http://www.coastairbrush.com/proddetail.asp?prod=T61 (http://www.coastairbrush.com/proddetail.asp?prod=T61)
Anything you need, just ask.
- Jeff