News:

Salty's Lure Paint Now Available!
Bright colors, Chip resistant finish, fast drying!
http://www.saltwaterplugs.com/lure%20paint.htm

Main Menu

Screw-in eyes

Started by Hobieblue, January 15, 2012, 05:08:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Hobieblue

January 15, 2012, 05:08:50 PM
I am going to start working on a couple 1.25 oz topwater gliders.  I have two quick questions: first, the kit comes with three screw-in eyes, one is shorter that the others...is that one the belly screw or the front screw?  Second: do I use epoxy or something to glue in the eye screws, or can they just get screwed in without glue?

Thanks.

HB

Salty

#1
January 15, 2012, 05:53:37 PM
Long ones front and rear and small goes in belly. Either use CA glue or 30 minute epoxy stuffed in the hole with a piece of wire.
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Croaker

#2
January 18, 2012, 08:28:23 PM
Scott, no 30 min. Epoxy on your site?
Tom C

Salty

#3
January 19, 2012, 05:20:40 AM
No I can't get it through the distributor. Not satisfied with this.
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts
Print
Go Up Pages1
User actions