Author Topic: Great video on applying Flexcoat Lurepoxy!  (Read 125 times)

0 Members and 1 Guest are viewing this topic.

Offline Out Fishing

  • Admin
  • *****
  • Posts: 5626
Great video on applying Flexcoat Lurepoxy!
« on: March 10, 2019, 11:13:11 am »

Here's a great video on applying Flexcoat Lure Epoxy!


https://www.youtube.com/watch?v=Q_BcZVu1rns&feature=youtu.be
Better to have a short life that is full of what you like doing than a long life spent in a miserable way....Alan Watts

Offline Out Fishing

  • *
  • Posts: 16
Re: Great video on applying Flexcoat Lurepoxy!
« Reply #1 on: April 06, 2019, 10:11:48 pm »
Just started using the Flexcoat lure epoxy. Used an ox hair brush to apply. Comparing e tex to FC e tex has more flow rate and applies easier with foam  brush. On the other hand applying more to brush allows u to drag FC to cover. I use 50% more epoxy per lure i.e. 8"pike 3cc ea to 2cc e tex. I heated with hot water but it set up too quickly. Room temp was much better. I wonder if you can thin down the epoxy with acetone like the FC rod finish
    Put them in spinner after giving the plugs a quick pass with heat gun. I ran spinner 6 hrs. Within 12 hours the finish was dry and carefully  handle with hands. After 2 days it was extremely harder than e tex. BTW they are like glass. Like all first attempts with a new product, you learn nuances on the product and either you like or hate. Me, I like!!!. Thanks Scott for the heads up.