4" long,
1"
diameter and 1.25 Oz size,
Salty's own natural air dried Northern White Pine Wood,
Uses .092 Magnum Stainless Steel Screw Eyes for maximum durability.
Pull
tested to over 310 lbs when glued with epoxy!
All kits are
sanded out to 150 grit and require minimal if any sanding. All holes are
pre-drilled for easy assembly.
All
components are included except for split rings and hooks which we
recommend
1/0 treble hooks for the belly and tail of this lure.
We use only USA made components in our kits!
Very
simple twitching action on this lure, excellent kit for starting out,
and VERY good for use with kids!
Kit requires the use of epoxy to glue
the special lure screw eyes. When properly installed a screw eye will
outperform a through wired lure!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware