5.5" long and
size, stainless steel thru-wired this is a great swimmer!
Oversized 1/2" molded eyes!
All kits are
sanded out to 150 grit and require minimal sanding.
Dannies can be one of
the most deadly swimming lures! They wobble across the top with a nice
All components are included except for split rings and hooks which we
VMC 3/0 or 4/0 treble hooks for the belly
and a VMC 6/0 dressed siwash on the tail of this lure.
We use only USA made components in our kits!
simple retrieve on this lure, it will tail wag/wobble right on top.
This swimmer is an advanced kit. It requires installing lead
weights with epoxy and re-drilling the thru-wire with a 5/32x4" drill
We recommend this is done with a battery drill or hand drill for
It requires sealing, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: