|
Another Salty's kit
exclusive! 3 Oz
size, stainless steel thru-wired this is a copy of an original Danny
Pichney Danny swimmer!
These
will dive and swim with a nice wiggle side to side. These were fish slayers
and we've re-created them!
All kits are
sanded out to 150 grit and require minimal sanding-see the special notes
below!
All components are included except for split rings and hooks, which we
recommend VMC 4/0 treble hooks for the belly
and a dressed tail on this lure.
We use only USA made components in our kits!
This
slopehead danny is a intermediate kit.
It requires gluing the metal lip in, re-drilling the belly weight with a
1/8" drill bit/battery drill,
minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with ordinary spray bombs,
remember to seal first and then can be painted with Testors/acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability. See the pictorial page for more information.
|
