7.5" long and
size, stainless steel thru-wired this is a copy of an original Beachmaster Cowboy Sr
Sloped Head metal lip swimmer,
right down to the original Danny Pichney Conrad style lips which reduced roll and give
a nice tight wiggle swim at a very slow retrieve.
Also the use of large belly weights gives this lure a very low center of
gravity over a wide area which enhances the action and balance.
All kits are
sanded out to 150 grit and require minimal sanding.
All components are included except for split rings and hooks which we
recommend a pair of VMC 3/0 treble hooks
for the belly
and a dressed buck tail stub on the tail of this lure. This kit
contains 500lb Krok stainless steel swivels for the ultimate in
Very simple retrieve on this lure, it
will dig down 4-6' or more on a slow retrieve.
swimmer is a good intermediate kit. It requires gluing the lip in,
gluing the weights in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: