2.5" long and 1 oz
size, stainless steel thru-wired this is a great little swimmer! Looks
just like a peanut bunker when it swims!
All kits are
sanded out to 150 grit and require minimal sanding.
components are included except for split rings and hooks which we
recommend 2/0 treble hook for the belly,
and a bucktail dressed stub on the tail of this lure.
We use only USA made components in our kits!
simple retrieve on this lure, it will tail wiggle and wag on top to just
below the surface.
Bend the lower lip up and make it a diver!
Very "unique" shape :)
swimmer is a good intermediate kit. It requires gluing the lip in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. Checkout our
Super Coat, it makes a great wood sealer and Top Coat!