|
7 3/4" long and
2.75 Oz
size, stainless steel thru-wired this is a great swimmer!
Your choice of holographic eyes or not!
All kits are
sanded out to 150 grit and require minimal sanding.
The belly grommet holes
are recessed flat, and kits are weighted with one belly weight only-can
easily be re-drilled for heavier weight.
This swimmer is a copy of an original Danny Pichney Atom 40 Style Swimmer
lure.
All components are included except for split rings and hooks which we
recommend a pair of VMC 3/0 treble hooks for the belly
and 6/0 Siwash or a Bucktail stub on the tail of this lure.
We use only USA made components in our kits!
Very
simple retrieve on this lure, it will tail wag right on top, and will
dive on faster retrieve.
This
swimmer is a good intermediate kit. It requires gluing the lip in,
gluing the weight in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware
 |
WARNING:
This product can expose you to chemicals
including Wood Dust & Lead, which is
known to the State of California to
cause cancer and or birth defects or
other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Saltys is a small business and exempt
from California Proposition 65 warning
requirements, but choose to provide them
voluntarily for known chemicals. Wash
hands after handling, DO NOT smoke or
eat with contaminated hands! Keep away
from children and do not ingest! USE
COMMON SENSE! |
|
