7" long and
2 Oz
size, stainless steel thru-wired this is a great swimmer!
Oversized 1/2" molded eyes!
All kits are
sanded out to 150 grit and require minimal sanding.
The belly grommet holes
are recessed flat, and we used a oversize belly weight to eliminate some
roll.
This swimmer is an exact copy of an original Danny Pichney Sandeel Swimmer
lure.
Can easily be made into a sloped head lure also with some sanding!
All components are included except for split rings and hooks which we
recommend VMC 2/0 treble hooks for the belly
and 5/0 Siwash or a bucktail stub on the tail of this lure.
We use only USA made components in our kits!
Very
simple retrieve on this lure, it will tail wag right on top. This
swimmer is a good intermediate kit. It requires gluing the lip in,
glueing the weight in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware
|